Cable Tray Roll Forming Machinery, China Cable Tray Roll Forming Machinery Supplier and Manufacturer

The Cable Tray Roll Forming Machine Produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control penel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacturing a both superiority and quantity cable trays in less time.

De coiler 2 ton cap.
Entry Gate with
Roll Forming Line with 9 station, 1 Gear Boxes & 3H.P. electrical.
Control Panel semi auto
Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed:
600 mm
Maximum sheet thickness in G I Strips that can be formed:
1 mm
Vertical distance between shafts:
100 mm
Horizontal distance between shafts:
190 mm
Number of forming stations:
9 nos.
Vertical station:
7 nos.
Total HP for Line:
3(ABB)
Speed of the machine:
4mt/minute
Size of machine :
1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight:
2 MT Max
Coil width:
600 MM
Coil bore:
450 MM min, 510 MM max dia.
Mandrel movement:
Manually adjusted
Back Tension:
Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 3 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.

Feeder

Shaft Dia. - 60 mm
Inner - 200 mm
Material - EN 31
Motor H.P. - 1
Gear box - 1

Cutting Unit

10 tone Power press (with dais 2 set)

GEAR BOX – ELECON
Motor – ABB
Bearing -SKF

Cable Tray Rollformers

Manufacturer of welded-structure wire mesh cable trays and basket trays, perforated metal cable trays, channel trays and ladder trays for cable line system protection.

Supports the cable tray industry by engaging in research, development, education and the dissemination of information designed to enhance and increase the visibility of the industry.

Makes aluminum and steel ladder-style tray, wire mesh and single-support trough trays, and totally enclosed EMI-shielded trays.

Cable Tray Roll Forming Production Lines

Offer used bakery equipment to the wholesale baking industry, supply and install tunnel ovens, travelling tray ovens, horizontal mixers, complete bread, roll and cake make-up lines.

Manufacturing coil processing lines cut to length, slitting, roll forming, and related products. Also web development services.

Full line manufacturer of communications wire and fiber optic cable.